Spec YS-2KVA YS-2KVS
UNIT : mm / 60Hz
Table size ( L x W ) mm
1067 x 228 ( 42" x 9" ) /
1244 x 228 ( 49" x 9" ) opt.
T slot ( W x No. x Dist.)
3 x 16 mm x 63 mm
Slideway hardened & surface ground
YES
Table surface hardened & ground
YES
Slideway dovetail "V" or square "SQ"
X / Y / Z = V
X axis ( Manual travels ) mm
700 / 860 opt.
Distance from spindle nose to table surface mm
50 - 460
Distance from spindle center to column mm
160 - 490
Travel reduced with power feed ( X axis ) mm
60
Head swiver angle ( R / L )
±90°
Head tilting angle ( up / down )
±45°
Spindle main motor HP
3 / 5 opt.
Spindle speeds rpm. ( step pulley )
80-2720 ( 8 steps ) / 80-5440 ( 16 steps )
Spindle speeds rpm. ( Mechanical Variable )
70-4200
Spindle speeds rpm. ( Inverter Variable )
70-4200
Spindle taper
R8 or ISO 30
Quill feed rate mm/rev
0.04 / 0.08 / 0.15
Machine Net weight kgs
950
* The above machine specification is subject to change without previous notice due to the continuous improvement of R&D.
MECHANICAL HEAD
VA series
Step Speed Head
VS series
Variable Speed Head
STANDARD ACCESSORIES
1. Draw bar
2. Slide way cover
3. Tools and toolbox
4. Operate manual and parts list
5. One shot lub.
OPTIONAL ACCESSORIES
1. Air power draw bar
2. Table guard
3. Chip pan
4. Work light
5. Spindle guard
6. CE electric
7. Coolant system
8. Power feed ( X, Y, Z Axis )
OPTIONAL ACCESSORIES
Power feed ( X, Y, Z Axis )
Air power draw bar
Halogen worklight
Safety spindle guard
Chip pan
