1270 x 254 ( 50" x 10" ) /
1370 x 254 ( 54" x 10" ) opt.
T slot ( W x No. x Dist.)
3 x 16 mm x 63 mm
Slideway hardened & surface ground
YES
Table surface hardened & ground
YES
Slideway dovetail "V" or square "SQ"
X / Y / Z = V
X axis ( Manual travels ) mm
800 / 915 opt.
Y axis mm
380
Z axis mm
430
Distance from spindle nose to table surface mm
50 - 480
Distance from spindle center to column mm
140 - 660
Travel reduced with power feed ( X axis ) mm
60
Head swiver angle ( R / L )
±90°
Head tilting angle ( up / down )
±45°
Ram travel mm
508
Spindle main motor HP
3 / 5 opt.
Spindle speeds rpm. ( step pulley )
80-2720 ( 8 steps ) / 80-5440 ( 16 steps )
Spindle speeds rpm. ( Mechanical Variable )
70-4200
Spindle speeds rpm. ( Inverter Variable )
70-4200
Spindle taper
R8 or ISO 30 ISO 40 opt.
Spindle travel mm
127
Quill feed rate mm/rev
0.04 / 0.08 / 0.15
Quill diameter mm
85.7
Machine Net weight kgs
1000
* The above machine specification is subject to change without previous notice due to the continuous improvement of R&D.
MECHANICAL HEAD
VA series
Step Speed Head
VS series
Variable Speed Head
STANDARD ACCESSORIES
1. Draw bar
2. Slide way cover
3. Tools and toolbox
4. Operate manual and parts list
5. One shot lub.
OPTIONAL ACCESSORIES
1. Air power draw bar
2. Table guard
3. Chip pan
4. Work light
5. Spindle guard
6. CE electric
7. Coolant system
8. Power feed ( X, Y, Z Axis )
9. Z axis rapid feed ( for 3K )
