Bed Type Mill YS-5BVA YS-5BVS YS-5BIV | Bed Type Milling Machine Manufacturer, High Quality Bed Type Milling Machine

YS-5BVA YS-5BVS YS-5BIV

YS-5BVA - Step Speed Head
YS-5BVS - Variable Speed Head
YS-5BIV - Inverter Variable Speed Head

5 HP Spindle Motor
X/Y slide way with Turcite-B
X dovetail slide way
Y / Z square slide way
Harden & ground on X / Y / Z axis

Spec YS-5BVA YS-5BVS YS-5BIV

UNIT : mm / 60Hz

MODEL

YS-5BVA

YS-5BVS

YS-5BIV

Table size ( L x W ) mm

1270 x 254 ( 50" x 10" ) / 1370 x 254 ( 54" x 10" ) opt.

T slot ( W x No. x Dist.)

3 x 16 mm x 63 mm

Slideway hardened & surface ground

YES

Table surface hardened & ground

YES

Slideway dovetail "V" or square "SQ"

X = V YZ = SQ

X axis ( Manual travels ) mm

800 / 915 opt.

Y axis mm

510

Z axis mm

700

Distance from spindle nose to table surface mm

50 - 750

Distance from spindle center to column mm

410

Travel reduced with power feed ( X axis ) mm

Head swiver angle ( R / L )

±90°

Head tilting angle ( up / down )

±45°

Spindle main motor HP

Spindle speeds rpm. ( step pulley )

80-2720 ( 8 steps ) / 80-5440 ( 16 steps )

Spindle speeds rpm. ( Mechanical Variable )

70-4200

Spindle speeds rpm. ( Inverter Variable )

70-4200

Spindle taper

ISO 40

Spindle travel mm

127

Quill feed rate mm/rev

0.04 / 0.08 / 0.15

Quill diameter mm

100

Machine Net weight kgs

1100

* The above machine specification is subject to change without previous notice due to the continuous improvement of R&D.

STANDARD ACCESSORIES

1. Draw bar
2. Slide way cover
3. Tools and toolbox
4. Operate manual and parts list
5. One shot lub.

OPTIONAL ACCESSORIES

1. Air power draw bar
2. Table guard
3. Chip pan
4. Work light
5. Spindle guard
6. CE electric
7. Coolant system
8. Column guard
9. Counter balance

YS-5BVA YS-5BVS YS-5BIV

Spec YS-5BVA YS-5BVS YS-5BIV

STANDARD ACCESSORIES

OPTIONAL ACCESSORIES

OPTIONAL ACCESSORIES

Z axis rapid up / down

Halogen worklight

Auto lubrication

Power feed ( X, Y, Z Axis )

Air power draw bar

Gear power table fees ( for X , Y axis )

Safety spindle guard

Chip pan

MECHANICAL HEAD

VA series

IV series

VS series

Inquiry

Mill & Lathe

Mill & Lathe

CONTACT INFORMATION